A6pci8019

The A6pci8019 is a Compact PCI board supporting the PICMG2.16 installed on the Intel Pentium M processor 745 (1.8GHz). The main memory is SO-DIMM supporting PC2700, and a maximum of 2GB can be installed. Two gigabit ethernet ports are on the front panel, and the rear panel has 3 ports for a total of 5 ports, flexibly supporting a variety of network connection configurations. Additionally, it is provided with a variety of interfaces, including USB 2.0, Compact Flash, 2.5 inch HDD, PMC, serial ATA, etc., offering excellent functional expandability.

Features

· CPU: Intel Pentium M processor 745 1.8GHz, L1 cache: 32KB/32KB, L2 cache: 2MB Provided with a passive heat sink and is fanless.
· Memory: Boot ROM: Firmware hub Flash memory, 1MB Main memory: SO-DIMM socket x 2 (supporting max 2GB/PC2700 ECC) 1GB module x 1, standard equipment Serial EEPROM: I2C-EEPROM 2Kbit
· Internal PCI bus: PCI-X bus: data 64bit/66MHz
· Front panel I/O: Serial port: TIA/EIA-232E RJ-45 connector x 1 Ethernet: 10/100/1000Base-T, RJ-45 connector x 2 Graphics: D-sub 15 pin/male connector (on-board 855GMCH) USB 2.0 x 2
· Onboard I/O: PMC I/F: 64-bit, 66MHz Single Size x 1 CompactFlash: CF+ and CompactFlash Spec. Rev2.1 (module is an option)
2.5 inch HDD I/F: UltraATA/100 (HDD is an option)
· Rear panel I/O: Serial port: TIA/EIA-232E×2 (COM1 cannot be used at the same time as the front) Ethernet (PICMG2.16): 10/100/1000Base-Tx 2 Ethernet: 10/100/1000Base-Tx, 1PS/2 key board I/F, PS/2 mouse I/FUSB 2.0×2, Serial ATA1.0 ×2
· CompactPCI: PICMG 2.0 R3.0 CompactPCI Spec. PICMG 2.1 R2.0 CompactPCI Hot Swap Spec. PICMG 2.16 Packet Switching Backplane Rev. 1.0PCI Local Bus Specification Rev. 2.2 Functions as a transparent bridge when it is a system slot Separated from CompactPCI when it is a peripheral slot (with the exception of power supply and special signals) Signalling level: 3.3/5V (automatic discrimination) 32-bit data bus /33MHz
· Power Requirements: DC5V±5% max 7A DC3.3V±5% max 5A
· Board size: 6U, single slot